CONTACTS US Tel : 0086-551-65765203
            Add: Boyan Industrial Park, Hi-tech District , Hefei City .Anhui ,China
            Web : www.nqqss.com.
            E-mail : [email protected]


            1. Performance


            *  This Model is waterproof. The protection grade is IP63 and Max Power 800W.

            *  Wind Turbine and Load Adaptive Impedance Matching, maximize energy utilization.
            There is internal resistance in wind generators, batteries and loads. According to impedance matching principle, only when input impedance equals to output impedance, power utilization is maximal, get the maximum power.

            *  Protect wind generator from over-revolution speed, over-voltage and over-current
            Max revolution speed, max voltage and max current of wind generator could be set. Once the actual revolution speed, voltage or current over the default value, PWM intelligent unloading will start automatically. That protect wind generator.

            *  Intelligent limiting of batteries max current
            Batteries maximum capacity could be set through this controller. According to the set maximum capacity, controller could calculate the maximum charging current. Then batteries will be protected.

            *  Temperature compensation for battery
            According to the environment temperature, the controller could adjust some voltages of battery to ensure that the battery could be fully charged in winter

            *  Temperature protection
            According to detect the inner temperature, the controller could adjust the charging power and protect the whole system

            *  Solar MPPT charging, improve energy utilization
            There is internal resistance in Solar panels, batteries and loads. According to impedance matching principle, only when input impedance equals to output impedance, power utilization is maximal, get the maximum power.

            *  Braking manually

            *  Wind charging manual switch

            On the controller you can manually set whether using wind charge to battery.

            *  Solar charging manual switch
            On the controller you can manually set whether using solar charge to battery.

            *  DC output manual switch
            Users could manually set whether use DC output.

            *  Two DC output, each one has 9 output modes

            *  RS232 interface
            By serial interface communication, you could monitor the whole system, storage and analyze data. Program could be upgraded by serial interface. Connect PC and controller by serial interface. You could set the parameters on PC and controller simultaneously.Software is free, easy to operate and no need to be installed.

            *  The LED lights on controller to display the working state



            2. Optional Functions

            *  Optional BOOST function(If do not buy Boost Wind Solar Streetlight Controller, there is no this function)
            Once wind generator voltage is lower than battery voltage, controller starts boost module automatically to charge to battery.

            *  Optional BUCK function(If do not buy Buck Wind Solar Streetlight Controller, there is no this function)
            Once wind generator voltage is higher than battery voltage, controller starts buck module automatically to charge to battery.

            *  Optional BOOST and BUCK function in one(If do not buy Boost & Buck Wind Solar Streetlight Controller, there is no this function)
            Once wind generator voltage is lower than battery voltage, controller starts boost module automatically. Wind generator voltage is increased to the charging voltage, and it is boost charging. When wind generator voltage is higher than battery voltage, in order to acquire max power,buck module of controller will be started, the generator is buck charging.Loads lower the revolution speed of wind generator, when it is breeze. That decreases the output power of wind generator. Through max current tracking (MCT) and max power point tracking (MPPT), output of wind generator is stabilized at the max balance of wind energy utilization. Combine with boost and buck function, wind energy utilization is increased

            *  Optional LCD Display Function
            If you need, you could to buy LCD screen to browse and set parameters.

            3. Parameters

            Item No.

            TGWS300W-12V

            Rated Battery Voltage

            12V

            Rated Wind Turbine Power

            200W

            Wind Turbine Maximum Input Power

            350W

            Rated Solar Power

            100W

            Maximum PV Input Voltage

            60V

            Wind dumpload Voltage ( Vmax )

            60V (Adjustable

            Wind dumpload Rotate Speed ( Rota )

            500R (Adjustable)

            Wind Pole Logarithm ( Pole )

            10D ( Adjustable)

            Wind Charging Range

            DC (6V-60V)

            Wind Start Charging Voltage ( CutIn )

            6V ( Adjustable)

            Under Voltage ( Low )

            10.2V (Adjustable)

            Under Voltage Recovery Voltage ( Rlow )

            11.5V (Adjustable )

            Float Voltage ( Flot )

            13.5V (Adjustable)

            Over Voltage ( Full )

            14.7V( Adjustable )

            Over Voltage Recovery Voltage ( RFull )

            13.2V ( Adjustable )

            Over-Load Voltage ( Out )

            17.5V (Adjustable)

            Over-Load Recovery Voltage ( Rout )

            15.0V ( Adjustable)

            PV Voltage Of Light-Control On (Lon )

            6V (Adjustable)

            PV Voltage Of Light-Control Off (Loff )

            6V (Adjustable)

            Line 1 Rated Output Current

            15A

            Line 2 Rated Output Current

            15A

            Line 1 Output Mode(Factory Default)

            Mode7: Light-control on, 3 periods working, Light-control off  (Adjustable)

            Line 2 Output Mode(Factory Default)

            Mode 4: full power working (Adjustable)

            Dump load control mode

            Over rotate speed limiting, Over voltage limiting, Over current limiting, PWM

            Wind Charging Mode

            PWM,( MPPT for boost, MPPT for buck , MPPT for Boost and Buck )

            Solar Charging Mode

            MPPT (Buck)& PWM

            Display Mode

            LED or LCD( Optional )

            Display Parameters

            Battery : Voltage , Charging Current , Percentage of battery power

            Wind : Voltage , Charging Current , Rotate Speed , Output current, Output Power

            Solar : Voltage , Charging Current

            Loads : Current , Power , Working mode

            System : State ,Generated energy , Erro code

            Working Temperature &Humidity

            -20~+55°C/35~85%RH(Without Condensation)

            Quiescent Current

            ≤1.5W

             

             

            Protection Function

            Battery: Over-discharge protection,Over-charge protection,Anti-reverse connection,Temperature Compensation.          
            Wind: Over rotate speed protection, Over voltage protection, Over current protection. 

            Loads: Over-load protection, Short circuit protection

            Communication Function

            RS232

            Optional Function

            LCD display

            Controller Size

            280mm*145mm*90mm

            Package Size

            385mm*205mm*150mm

            Net Weight

            2.6Kg

            Gross Weight

            3.2Kg 


            Item No.

            TGWS400W-12V

            Rated Battery Voltage

            12V

            Rated Wind Turbine Power

            250W

            Wind Turbine Maximum Input Power

            380W

            Rated Solar Power

            150W

            Maximum PV Input Voltage

            60V

            Wind dumpload Voltage ( Vmax )

            60V (Adjustable

            Wind dumpload Rotate Speed ( Rota )

            500R (Adjustable)

            Wind Pole Logarithm ( Pole )

            10D ( Adjustable)

            Wind Charging Range

            DC (6V-60V)

            Wind Start Charging Voltage ( CutIn )

            6V ( Adjustable)

            Under Voltage ( Low )

            10.2V (Adjustable)

            Under Voltage Recovery Voltage ( Rlow )

            11.5V (Adjustable )

            Float Voltage ( Flot )

            13.5V (Adjustable)

            Over Voltage ( Full )

            14.7V( Adjustable )

            Over Voltage Recovery Voltage ( RFull )

            13.2V ( Adjustable )

            Over-Load Voltage ( Out )

            17.5V (Adjustable)

            Over-Load Recovery Voltage ( Rout )

            15.0V ( Adjustable)

            PV Voltage Of Light-Control On (Lon )

            6V (Adjustable)

            PV Voltage Of Light-Control Off (Loff )

            6V (Adjustable)

            Line 1 Rated Output Current

            15A

            Line 2 Rated Output Current

            15A

            Line 1 Output Mode(Factory Default)

            Mode7: Light-control on, 3 periods working, Light-control off  (Adjustable)

            Line 2 Output Mode(Factory Default)

            Mode 4: full power working (Adjustable)

            Dump load control mode

            Over rotate speed limiting, Over voltage limiting, Over current limiting, PWM

            Wind Charging Mode

            PWM,( MPPT for boost, MPPT for buck , MPPT for Boost and Buck )

            Solar Charging Mode

            MPPT (Buck)& PWM

            Display Mode

            LED or LCD( Optional )

            Display Parameters

            Battery : Voltage , Charging Current , Percentage of battery power

            Wind : Voltage , Charging Current , Rotate Speed , Output current, Output Power

            Solar : Voltage , Charging Current

            Loads : Current , Power , Working mode

            System : State ,Generated energy , Erro code

            Working Temperature &Humidity

            -20~+55°C/35~85%RH(Without Condensation)

            Quiescent Current

            ≤1.5W

             

             

            Protection Function

            Battery: Over-discharge protection,Over-charge protection,Anti-reverse connection,Temperature Compensation.          
            Wind: Over rotate speed protection, Over voltage protection, Over current protection. 

            Loads: Over-load protection, Short circuit protection

            Communication Function

            RS232

            Optional Function

            LCD display

            Controller Size

            280mm*145mm*90mm

            Package Size

            385mm*205mm*150mm

            Net Weight

            2.6Kg

            Gross Weight

            3.2Kg 



            Pre:800W-24V Hybrid Street Light Controller(Boost&Buck)
            Next:300W-12V Wind/Solar Hybrid Street Light Controller (Boost)
            免费香蕉依人在线狼人